How to use this box with Vagrant:
Vagrant.configure("2") do |config| config.vm.box = "juniper/vqfx10k-pfe" config.vm.box_version = "0.3.0" end
vagrant init juniper/vqfx10k-pfe \ --box-version 0.3.0 vagrant up
This version was created over 4 years ago.
vQFX vPFE compatible with Junos release 17.4R1.16
END USER LICENSE AGREEMENT\ (May 2016 Release)
This Juniper End User License Agreement ("Agreement") governs Your rights and duties with respect to the Software. Capitalized terms used in this Agreement are defined in Section 28 (Definitions).
a. When You purchase or rightfully receive a license to a Software > product, Juniper grants You a worldwide, non-exclusive, > non-transferrable right to install and use that Software for > the term stated in Your Proof of Entitlement.
b. As long as Your use of the Software does not exceed the quantity > of License Metric units that You purchased, You may copy, > install and use the Software on any device that supports it > (and you may move the Software from one device to another), > EXCEPT (i) for operating system software (and any separately > licensable Software products that may be included along with > the operating system software in the object code image you > receive from Juniper) and its Updates, all of which may only > be installed and used on a replacement Juniper Platform > (obtained from Juniper or an Approved Source) in the event of > a hardware failure (with prompt notice to Juniper); (ii) for > Software and its Updates accessed by You through a Commercial > Cloud Service provider acting as an Authorized Reseller or > other Juniper-authorized Commercial Cloud Service provider in > which case You shall be entitled to access and use only such > Software instance(s) as may be provisioned for You in the > Commercial Cloud Service environment and your right to access > and use shall be solely through the Commercial Cloud Service; > or (iii) as otherwise agreed to in a written amendment to this > Agreement.
Trust Based Licensing Model. Most Software offered by Juniper
employs no programmatic license enforcement. It is Your responsibility to both monitor Your usage level, and purchase sufficient License Metric units to meet Your Software usage.
License Name. Each Software product is identified by unique
name. This name, when combined with a Version number corresponds to a specific base set of product features and functionality identified to that Version of the Software in Juniper’s Feature Documentation.
Term of License.
a. Subscriptions. If Your license is a Subscription, then the > term of the Subscription shall be 12 months unless Your Proof > of Entitlement states otherwise. You may, however, renew or > reinstate Your Subscription subject to the terms of the > Applicable SDD. Subscription renewals are subject to terms of > Juniper’s then-current EOL and EOS policies and procedures > (see http://juniper.net/support/eol/) > ("EOL/EOS Policies").
b. Special Purpose Licenses. If Your license is a Special Purpose > License (see Section 6, below), then its term shall be that > stated in Your Proof of Entitlement. If You have no Proof of > Entitlement or if Your Proof of Entitlement fails to state a > license term, then the term of Your license shall be 90 days > from date that You first received the Software, whether via > download or otherwise.
c. Perpetual Licenses. If You have a valid Proof of Entitlement > that states that Your license is "Perpetual," then, except as > stated below, Your license is perpetual, subject only to > termination for nonpayment of license fees or other breach of > this Agreement. An otherwise Perpetual License to operating > system software (as well as any separately licensable Software > products that may be included along with the operating system > software in the object code image you receive from Juniper) > and its Updates nonetheless terminates if and when You sell or > otherwise transfer the Juniper Platform on which You use it, > or when Your lease to that Juniper Platform terminates.
License Metrics. License Metrics include the following:
a. Core – the number of Cores available for any instance of > Software to operate on, where “Core” means an individual > processing unit that is embedded in a computer processor. A > processor may contain multiple Cores. If one or more instances > of Software is installed for use on a virtual machine, then > the number of Cores assigned to the virtual machine will be > counted as available for such instance(s) of Software.
b. CPU Socket – the number of CPU Sockets available for any > instance of Software to operate on, where "CPU Socket" means a > mechanical component that provides electrical connectivity > between a microprocessor and a printed circuit board. If one > or more instances of Software is installed for use on a > virtual machine, then the number of CPU Sockets assigned to > the virtual machine will be counted as available for such > instance(s) of Software.
c. Events per Second - the maximum rate of Events per second > that the Software, as deployed, is capable of detecting, > logging, recording, monitoring, analyzing or otherwise acting > upon or processing. For purposes of this metric, “Event” means > a condition or state in the network, including a condition or > state in a data path in the network, in an element of the > network or in a device connected to the network. If multiple > instances of the Software are used, then total Events per > Second is the sum of the maximum rates across all such > instances.
d. Flows per Second - the maximum rate of sequences of > packets per second from a source device to a destination that > the Software, as deployed, is capable of detecting, logging, > recording, monitoring, analyzing or otherwise acting upon or > processing. If multiple instances of the Software are used, > then total Flows per Second is the sum of the maximum rates > across all such instances.
e. Managed Users – the number of individuals to which You and > Your direct customers grant access for one or more services > furnished, managed, or provisioned by any instance of the > Software. A Managed User who accesses such services through > multiple devices is nonetheless counted as a single Managed > User.
f. Network Element – – the number of physical or virtual > devices that are recognizable by any instance of the Software > as devices that it may administer, monitor, manage, provision, > or otherwise act upon.
g. 100Mbps – the maximum rate of total bits of throughput > (inbound or outbound) per second (measured in 100Mbps per > second units) that the Software, as deployed, is capable of > detecting, monitoring, or otherwise acting upon or processing. > If multiple instances of the Software are used, then total > 100Mbps is the sum of the maximum rates across all such > instances.
h. Gbps - the maximum rate of total bits of throughput > (inbound or outbound) per second (measured in Gbps per second > units) that the Software, as deployed, is capable of > detecting, monitoring, or otherwise acting upon or processing. > If multiple instances of the Software are used, then total > Gbps is the sum of the maximum rates across all such > instances.
i. Other Forms of License. Other License Metrics may be > defined for specific Software products in a “Software-Specific > Entitlement Addendum” (“SSEA”).
Special Purpose Licenses. Special Purpose Licenses may not be
used for any production or commercial application. License Metric limitations do not apply to Special Purpose Licenses.
a. Demonstration Use-based License. If Your Proof of Entitlement > for certain Software (or a separate written agreement with > Juniper) identifies Your license as “Demonstration Use” or > with words of like meaning, AND if You are a > Juniper-authorized distributor or reseller, then for the > license term You may use the Software but only to demonstrate > features and performance of the Software to prospective buyers > and only while You remain a Juniper-authorized distributor or > reseller.
b. Research and Development Use-based License. If Your Proof of > Entitlement for certain Software (or a separate written > agreement with Juniper) identifies Your license as “Research > and Development Use” or “Lab Use” or with words of like > meaning, then for the license term You may install and use the > Software but only for internal research and development.
c. Evaluation Use-based License. If Your Proof of Entitlement for > certain Software (or a separate written agreement with > Juniper) identifies Your license as “Evaluation Use” or with > words of like meaning, or if You have no Proof of Entitlement, > then for the license term (Section 4, above) You may install > and use the Software but only for internal evaluation of the > Software.
d. Education Use-based License. If Your Proof of Entitlement for > certain Software (or a separate written agreement with > Juniper) identifies Your license as “Educational Use, > “Training Use” or with words of like meaning, then for the > license term You may install and use the Software solely as a > training tool in a Juniper-authorized class that You conduct > in the use of that Software. You may so use the Software only > while You are operating under a valid and active Global > Academic Alliance agreement or Authorized Education Partner > agreement with Juniper. You may not, however, allow anyone to > access the software other than the instructor and the students > duly enrolled in the class, and You may not allow students to > copy or download or remove any copy of Software or to use the > Software other than for conduct of coursework.
Maintenance Services; Updates.
a. General. Subject to its EOL/EOS Policies, Juniper makes > available the maintenance services (the "Maintenance > Services") described in the "Applicable SDD", which > means (i) for Software other than operating system software, > the Juniper Care Software Advantage Service Description > Document > at http://www.juniper.net/support/guidelines.html, > or (ii) for operating system software, the Juniper Care > Service Description Document > at http://www.juniper.net/support/guidelines.html. > All Maintenance Services are subject to the terms and > conditions of this EULA and the Applicable SDD.
b. Subscriptions. If Your Software is licensed under a > Subscription, then during the term of the Subscription, > Juniper shall provide Maintenance Services for that Software > at no additional charge.
c. Special Purpose Licenses. Juniper has no obligation to furnish > Maintenance Services of any kind for Software licensed under > Special Purpose License.
d. Maintenance Contracts for Licenses other than Subscriptions i. If your license is not a Subscription or a Special Purpose > License, then Maintenance Services are available only if > you purchase them at an additional fee. ii. If Your license is not a Subscription or a Special Purpose > License, then You must purchase and pay for a support > contract that meets all of the following requirements: A. The contract must be for at least the initial > twelve (12) months of Your license. B. The contract must cover all of Your License Metric Units > of the Software C. The contract must provide at least for the Maintenance > Services as described in the Applicable SDD or their > substantial equivalent; AND D. The contract must either be purchased from Juniper or > its Approved Sources, or from a Juniper-authorized > Support Service Specialist; provided that if you > purchase the contract from a Support Service > Specialist, you acknowledge and agree that 1. Support Service Specialist has not entered > into or performed under that contract either as an > partner, joint venturer, employee or agent of > Juniper and 2. Your sole recourse for any breach of such contract > or damage or loss arising out of or relating to > such contract shall be solely against the Support > Service Specialist.
e. Updates. Updates are available to You only as a part of > Maintenance Services. By downloading, taking delivery of or > using any Update, Your rights with respect to the Update are > subject to the terms the latest revision of this Agreement > posted at the time of Your receipt or first use of the Update, > any applicable SSEA, the then-current Applicable SDD, > then-current EOL/EOS Policies, and Your Proof of Entitlement > for the Software. Your rights to use the Update are also > subject to Your ceasing all use of the replaced Software (or, > as the case may be, the replaced portion of the Software in > the case and Update is provided in form of a patch). Certain > License Restrictions, Limitations and Prohibitions.
Certain License Restrictions, Limitations and Prohibitions. This
Section 8 supersedes any contrary provision elsewhere in this Agreement and applies to all varieties of licenses, whether Special Purpose Licenses, Subscriptions, Perpetual or otherwise:
a. No Rights or Licenses Implied. Licenses or rights in the > Software not expressly granted in this Agreement shall not > arise by implication or otherwise.
b. Approved Source. You shall have no right or license in the > Software unless You rightfully received the Software from an > Approved Source.
c. No Sublicensing or Assignment. You may not sublicense, > transfer or assign, whether voluntarily or by operation of > law, any right or license in or to the Software or under any > Proof of Entitlement. Any attempted sublicense, transfer or > assignment shall be void. \ > If You are a party to a transaction (or related series of > transactions) involving a merger, consolidation or other > corporate reorganization (collectively, a "Restructure") > where You do not survive the transaction(s), the > transaction(s) shall also be deemed a prohibited transfer.
d. You are Sole Licensee. No rights or licenses in the Software > or any Maintenance Services shall arise under this Agreement > in favor of anyone other than You.
e. Separately Licensable Software. The software image that > contains Software product that You license from Juniper or its > Approved Sources might also include additional unlicensed > features or functionality that You may not use unless You > purchase a separate license at an additional fee. Features and > functionality are not included in your license to the Version > of the Software product you licensed unless a published > Juniper feature description for that Version of the Software > identifies those features and functionality as being included.
f. Restrictions on charging a fee for access or use. You shall > not allow any customer or other third party to grant anyone > else access for a fee or other consideration to services, > content or resources that are generated, managed, distributed, > provisioned, billed or enabled by the Software.
g. Any duty that Juniper might have to deliver a copy of the > Software to You is subject to Juniper’s ability to deliver > such copy to You in compliance with all applicable export > control laws and regulations.
i. Source Code. In the limited event that Software includes > source code, such source code is provided for reference > purposes only unless expressly licensed otherwise by Juniper > or its licensors.
j. Java Related Software Terms. You acknowledge Oracle owns the > Java trademark and all Java-related trademarks, logos and > icons including the Coffee Cup and Duke ("Java Marks") and > agree to: (a) comply with the Java Trademark Guidelines > at http://www.oracle.com/us/legal/third-partytrademarks/index.html; (b) > not do anything harmful to or inconsistent with Oracle's > rights in the Java Marks; and (c) assist Oracle in protecting > those rights, including assigning to Oracle any rights > acquired by the End User in any Java Mark. Furthermore, > Commercial Features that are not included in the licensed Java > Software included in the Software will require an additional > license from Oracle. “Commercial Features” means those > features identified in Table 1-1 (Commercial Features In Java > SE Product Editions) of the Program Documentation accessible > at http://www.oracle.com/technetwork/java/javase/documentation/index.html.
k. Other Use Restrictions and Prohibitions. You > shall *not*, directly or indirectly: i. Decompile, disassemble or reverse engineer the Software or modify, change, unbundle, or create derivative works based on the Software, except as expressly permitted by applicable law without the possibility of contractual waiver. If the law requires Juniper to provide interface information to You to adapt the Software, Juniper, at its option, may either (A) provide the information to You subject to Your acceptance of non-disclosure and use limitation terms that Juniper reasonably requires, or (B) perform that adaptation itself at a reasonable charge for services. ii. Copy the Software except for archival purposes or as necessary for You to install and make use of the Software as expressly licensed by Juniper. iii. Detach or separate any libraries, files, modules or other components embedded within a Software product or within a particular software image you have received even if that any such library, file, module or other component is separately licensable, or use any such modules, files or other components separately from the Software product or software image in which it is embedded (except to the extent that a documented feature of the Software product is implemented by doing so); iv. Furnish any copy of the Software or other means of access to the Software to any third party other than to Your contractor(s) (including but not limited to Your Commercial Cloud Service providers) solely for Your benefit in performing its contract services for You and in that case only if that contractor has agreed to adhere to the terms of this Agreement. If You do furnish Software or access to Software to Your contractor(s), You shall remain fully and primarily responsible to Juniper for compliance with all provisions of this Agreement; v. Remove (or, if the license includes the right to make copies of the Software, fail to include in those copies) any readme files notices, disclaimers, marks and labels included in the Software as delivered by Juniper; or vi. Use or allow use of the Software in violation of any applicable law or regulation or to support or facilitate any illegal activity.
License and Maintenance Contract fees; Taxes.
a. Fees. Unless otherwise specified in an SSEA, Your Proof of > Entitlement or a separate written agreement between You and > Juniper, License fees, Subscription fees and fees for > Maintenance Services contracts are due and payable in advance > upon acceptance of Your purchase order. Juniper reserves the > right to contract order processing and invoicing for fees owed > to Juniper with licensing, subscription or Maintenance > Services for Software to any third party. For example, in the > case of a Commercial Cloud Services license granted for Your > access and use of Software in a Commercial Cloud Services > environment administered by a third party Commercial Cloud > Services provider, such order processing and invoicing may be > conducted by such Commercial Cloud Services provider or its > agents or affiliates. In such case, You agree to pay all > amounts duly invoiced as instructed without any right of > counterclaim or offset in respect of claims You might have > against such contract party.
b. Taxes. All prices and fees payable in respect of any license > to Software (including any Subscription) or any Maintenance > Services contract entered into with Juniper are exclusive of > tax. You shall be responsible for paying taxes arising from > the licensing or delivery of Software (including any > Subscription) or purchase of Maintenance Services. If > applicable, valid exemption documentation for each taxing > jurisdiction shall be provided to Juniper prior to invoicing, > and You shall promptly notify Juniper if Your exemption is > revoked or modified. All payments that You make shall be net > of any applicable withholding tax. You will provide reasonable > assistance to Juniper in connection with such withholding > taxes by promptly providing Juniper with valid tax receipts > and other required documentation showing Your payment of any > withholding taxes; completing appropriate applications that > could reduce the amount of withholding tax to be paid; > applying for reduced tax rates; and notifying and assisting > Juniper in any audit or tax proceeding related to transactions > hereunder. You shall comply with all applicable tax laws and > regulations, and You will promptly pay or reimburse Juniper > for all costs and damages related to any liability incurred by > Juniper Networks as a result of Your non-compliance or delay > with its responsibilities herein. Neither party shall be > liable for taxes or assessments on the other party’s net > income, gross income, capital, net worth, franchise, > privilege, property, or any similar taxes or assessments. Your > obligations under this Section 9.b shall survive termination > or expiration of this Agreement.
a. Early Termination for Breach. If at any time You fail to make > timely payment of any applicable fees due in respect of > Software licensed or Maintenance Services, or use the Software > in excess of Your purchased License Metric units but fail > timely to notify Juniper of such excess use and purchase and > pay for additional License Metric units as required under > subsection 11.b, below, or otherwise breach any term of this > Agreement or the Applicable SDD, then Juniper may, in addition > to any other remedy to which it may be entitled, terminate > Your license to the Software and any rights You may have to > Maintenance Services.
a. Termination for Insolvency. Either party may terminate the SVC > Contract or Subscription, effective immediately upon written > notice, if the other party becomes the subject of a voluntary > or involuntary petition in bankruptcy or any proceeding > relating to insolvency, receivership, liquidation or > composition for the benefit of creditors, if that petition or > proceeding is not dismissed with prejudice within sixty (60) > days after filing.
b. Effect of Termination or Expiration. If Your license term > expires without renewal or reinstatement or otherwise > terminates, then You shall promptly destroy or return to > Juniper all copies of the Software and related documentation > in Your possession or control.
c. Survival. The provisions of Sections 7 through 28 shall > survive termination or expiration of this Agreement.
Recordkeeping and Audit.
a. Your Duty to Monitor Use. You agree to monitor Your use of all > Software and generate accurate, complete and auditable records > of levels of that use.
b. Reports of Excess Use; Purchase of Additional License Metric > Units. If at any time Your maximum level of use of the > Software exceeds the number of License Metric units You have > purchased, then on or before ten days after the last day of > the calendar quarter in which Your level of use first exceeded > that limit, You shall (i) notify Juniper in writing of Your > maximum level of use and (ii) order and purchase sufficient > License Metric units (in increments of the applicable minimum > allowable number of License Metric units) to meet or exceed > the maximum level of use of the Software during such calendar > quarter,. Your SSEA, Proof of Entitlement or separate written > agreement with Juniper may require You to report on Your usage > more often. Failure either to timely report such excess use or > to timely purchase and pay for the required additional License > Metric units in accordance with this subsection 11.b shall be > a material breach of this Agreement.
c. Juniper's Right to Audit. In order to enable Juniper to verify > Your compliance with this Agreement, You shall, throughout the > term of the license and for three years thereafter, provide to > Juniper and its professional advisors access to such > facilities, personnel, records and reports as reasonably > necessary for it to validate compliance with this Agreement. > Such right of inspection and copying includes without > limitation all Software monitoring records generated and > maintained under this Section 11, and all other written or > electronic data and reports that You generate or receive > relevant to a determination of whether You have complied with > this Agreement.
d. You hereby irrevocably consent and agree to execute and deliver > to Juniper all documentation and to perform all such other > acts including furnishing such waivers and releases, at > Juniper’s request and (subject to subsection 11.e, below) > expense to enable Juniper to have access to all documents and > records otherwise subject to inspection and audit under > subsection 11.c, above but in the custody of any third party.
e. If any inspection under subsection 11.c discloses that You used > the Software in excess of applicable License Metric units and > failed timely to comply with subsection 11.b, then on notice > of the inspection results, You shall immediately purchase and > pay for sufficient additional License Metric units (in > increments of the applicable minimum allowable License Metric > units) to meet or exceed Your maximum level of use of the > Software d have been required to Your use from at any time > exceeding Your purchase License Metric units; purchase and pay > for contracts for Maintenance Services sufficient to cover > Your new total number of License Metric units; pay late > payment fees accruing on the purchase price of such additional > License Metric units and on the amount of underpayment in > respect of contracts purchased or required for Maintenance > Services at a rate of 1% per month for each calendar month > since the month on which Your use first exceeded Your License > Metric units; and pay the reasonable costs incurred by Juniper > in conducting the audit. The remedy stated in this Section > 11.e is in addition to any other remedy Juniper may otherwise > have.
Statements of Product Direction, Benchmarking Results.
a. Juniper may from time to time disclose information related to > its development and plans for future products, features or > enhancements (“SOPD”). SOPD information is subject to change > at any time, without notice. Except as may be set forth in > definitive agreements for the potential transaction, Juniper > provides no assurances, and assumes no responsibility, that > future products, features or enhancements will be introduced. > Except as may be set forth in definitive agreements for the > potential transaction, You should not base purchasing > decisions upon reliance of timeframes or specifics outlined in > an SOPD, because Juniper may delay or never introduces the > future products, features or enhancements.
b. "Confidential Information" includes any SOPD, any results of any > benchmarking or other testing You perform on the Software or > any information disclosed by one party to the other relating > to the Software or any Maintenance Services (i) in tangible > form if it is designated “Confidential” or “Proprietary”; (ii) > orally, if also summarized in writing and delivered to the > other party within 30 days of disclosure; or (iii) that by the > nature of the information and the circumstances of the > disclosure, the receiving party should reasonably infer to be > confidential or proprietary. Confidential Information does not > include information that: (a) is or becomes generally known > through no fault of the receiving party, (b) is known to the > receiving party at the time of disclosure, as evidenced by its > records, (c) is hereafter furnished to the receiving party by > a third party as a matter of right and without restriction on > disclosure; (d) is independently developed by the receiving > party without any breach of this Agreement; or (e) is > disclosed in response to a valid order of a court or other > governmental body or is otherwise required by law to be > disclosed, provided the responding party gives sufficient > notice to the other party to enable it to take protective > measures.
c. Each party will use a reasonable degree of care to maintain all > Confidential Information of the other in confidence and > neither will disclose to any third party nor use Confidential > Information of the other for any unauthorized purpose. Each > party may only disclose Confidential Information to those of > its employees and representatives that both (i) may have a > need to know for purposes of internal evaluation in the case > of any SOPD or otherwise for Your internal purposes in > configuring, installing, using or supporting the Software > and (ii) are legally bound by confidentiality obligations no > less stringent than those of this Agreement. No rights or > licenses to intellectual property in Confidential Information > are granted by either party under this Agreement, whether > express, implied or otherwise.
d. All Confidential Information will be returned immediately to the > disclosing party after the receiving party’s need for it has > expired or upon request of the disclosing party or termination > of this Agreement. Each party agrees that the violation of the > confidentiality provisions will cause irreparable injury to > the other entitling the other party to immediate injunctive or > other equitable relief, in addition to, and not in lieu of, > any other remedies such party may be entitled to.
e. Nothing in this Agreement shall prohibit or limit either party's > use or disclosure of the U.S. Federal income tax treatment and > U.S. Federal income tax structure of any transaction > contemplated by this Agreement and all materials of any kind > (including opinions or other tax analyses) that are provided > to it relating to such tax treatment or tax structure, except > where confidentiality is necessary to comply with applicable > federal or state securities laws.
Your Data. Unless Juniper otherwise agrees in a signed writing,
You shall not disclose or provide Juniper access to any personally-identifiable information, whether in data or any other form. You shall be solely responsible for all consequences of any such disclosure or grant of access.
Ownership. Juniper and Juniper’s licensors, respectively, retain
exclusive ownership of all right, title, and interest of all intellectual property in and to the Software. Nothing in this Agreement constitutes a sale or other transfer or conveyance of any right, title, or interest in the Software.
a. SOFTWARE LICENSED FOR RESEARCH AND DEVELOPMENT USE, EVALUATION > USE, DEMONSTRATION USE OR EDUCATIONAL USE ARE FURNISHED “AS > IS” WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, > EXPRESSLY OR IMPLIED. For any other license of Software under > this Agreement, Juniper warrants for Your sole benefit that > for a period of ninety (90) days from the commencement of the > license term (herein, the “Warranty Period”), the media on > which Software is delivered, shall be free from defects in > material and workmanship under normal authorized use > consistent with the product instructions. You may not make a > warranty claim after lapse of the Warranty Period. YOUR SOLE > AND EXCLUSIVE REMEDY AND THE ENTIRE LIABILITY OF JUNIPER FOR > BREACH OF ANY WARRANTY UNDER THIS SECTION 15 SHALL BE THE > REPLACEMENT OF THE MEDIA CONTAINING THE SOFTWARE.
b. Restrictions: No warranty will apply if the Software (or the > hardware on which the Software operates) (i) has been altered, > except by Juniper; (ii) has not been installed, operated, > repaired, or maintained in accordance with documentation and > instructions supplied by Juniper; (iii) has been subjected to > unreasonable physical, thermal or electrical stress, misuse, > negligence, or accident or (iv) has been licensed solely for > Research and Development Use, Lab Use, Evaluation Use or > Demonstration Use or if the Software is beta software or > otherwise not commercially released. In addition, neither the > Software nor any Juniper hardware system on which it may be > installed is designed or intended for (i) use in the design, > construction, operation or maintenance of any nuclear > facility, (ii) navigating or operating aircraft; (iii) > operating life-support or life-critical medical equipment > or (iv) incorporation in a dwelling or for personal, family, > or household purposes or otherwise for use as a consumer > product, and Juniper disclaims any express or implied warranty > of fitness for such uses. You are solely responsible for > backing up its programs and data to protect against loss or > corruption. JUNIPER WARRANTY OBLIGATIONS DO NOT INCLUDE > INSTALLATION, REINSTALLATION OR MAINTENANCE SERVICES OF ANY > KIND.
c. JUNIPER DISCLAIMS ANY WARRANTY, REPRESENTATION OR ASSURANCE THAT > THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE > SOFTWARE, WILL OPERATE WITHOUT ERROR OR INTERRUPTION, OR WILL > BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK.
d. Disclaimer of All Other Warranties. EXCEPT AS EXPRESSLY > PROVIDED IN THIS SECTION 15, TO THE EXTENT PERMITTED BY LAW > JUNIPER DISCLAIMS ALL WARRANTIES IN AND TO THE SOFTWARE > (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING > ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A > PARTICULAR PURPOSE, AND NONINFRINGEMENT, SATISFACTORY QUALITY, > NON-INTERFERENCE, ACCURACY OF INFORMATIONAL CONTENT, OR > ARISING FROM A COURSE OF DEALING, LAW, USAGE, OR TRADE > PRACTICE. TO THE EXTENT AN IMPLIED WARRANTY CANNOT BE > EXCLUDED, THAT WARRANTY IS LIMITED IN DURATION TO THE EXPRESS > WARRANTY PERIOD. BECAUSE SOME STATES OR JURISDICTIONS DO NOT > ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, THE > ABOVE LIMITATION MAY NOT APPLY. THIS WARRANTY GIVES YOU > SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS > WHICH VARY FROM JURISDICTION TO JURISDICTION. This disclaimer > and exclusion shall apply even if the express warranty fails > of its essential purpose.
Limitation of Damages. To the extent permitted by law,
a. IN NO EVENT SHALL THE CUMULATIVE LIABILITY OF JUNIPER, ITS > DIRECTORS, OFFICERS, EMPLOYEES, AFFILIATES, SUPPLIERS AND > LICENSORS TO YOU FROM ALL CAUSES OF ACTION AND ALL THEORIES OF > LIABILITY (WHETHER UNDER CONTRACT OR STATUTE, IN TORT > (INCLUDING PRODUCT LIABILITY) OR OTHERWISE), EXCEED THE > GREATER OF (I) ONE HUNDRED US DOLLARS (\$100.00) IN THE > AGGREGATE OVER ALL COPIES OF ANY AND ALL SOFTWARE LICENSED TO > YOU BY JUNIPER OR ANOTHER APPROVED SOURCE; OR (II) THE PRICE > PAID TO JUNIPER FOR LICENSED RIGHTS TO THE SOFTWARE, FOR THE > SUBSCRIPTION OR FOR THE CONTRACT FOR MAINTENANCE SERVICES, > WHICHEVER GAVE RISE TO THE CLAIM.
b. IN NO EVENT SHALL ANY BREACH BY JUNIPER IN CONNECTION WITH ANY > REPRESENTATIONS, WARRANTIES OR COMMITMENTS, EXPRESS OR > IMPLIED, RELATING TO THE SOFTWARE OR WITH ANY DUTIES RELATING > TO FURNISHING YOU WITH MAINTENANCE SERVICES EXCUSE YOUR > UNAUTHORIZED USE OF SOFTWARE OR IMPAIR JUNIPER’S RIGHT TO > TERMINATE ANY LICENSE BASED ON YOUR BREACH OF THIS AGREEMENT.
c. NEITHER JUNIPER NOR ITS DIRECTORS, OFFICERS, EMPLOYEES, > AFFILIATES, SUPPLIERS OR LICENSORS SHALL BE LIABLE FOR ANY > LOST PROFITS, LOSS OF DATA, OR COSTS OR PROCUREMENT OF > SUBSTITUTE GOODS OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR > CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT OR > RELATING TO THE SOFTWARE, TO USE OF THE SOFTWARE OR TO ANY > MAINTENANCE SERVICES.
d. BECAUSE SOME JURISDICTIONS DO NOT ALLOW LIMITATION OR EXCLUSION > OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, SOME OR ALL OF THE > ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
e. TO THE EXTENT PERMITTED BY LAW, JUNIPER DISCLAIMS ANY AND ALL > LIABILITIES OR OBLIGATIONS WHATSOEVER RELATED TO THE SOFTWARE > OR ITS LICENSING TO OR USE BY ANYONE OTHER THAN YOU. You shall > defend, indemnify and hold Juniper harmless from and against > any liability, damages, loss or cost (including attorneys’ > fees) arising out of or relating to any dispute, lawsuit, > administrative hearing, arbitration or settlement based on any > claim by a party other than You relating to that You > originally licensed (or relating to a service You offered > involving use of the Software).
f. Juniper has set its prices and entered into this Agreement in > reliance upon the disclaimers of warranty and the limitations > of liability stated above. Those disclaimers and limitations > reflect an allocation of risk between the Parties, and they > form an essential basis of the bargain between the Parties.
Compliance with Laws; Export Requirements. You shall comply with
all applicable laws and regulations in connection with Your movement and use of the Software and any Maintenance Services. You warrant and represent that You are not on (and You are not acting on behalf of anyone on) any Denied Persons list, Entity List, Unverified List, Specially Designated Nationals List (nor are You or anyone on whose behalf You might be acting an entity 50% or more owned or controlled, directly or indirectly by anyone on the Specially Designated Nationals List) or on other like list of parties subject to sanctions or to whom or by whom exports or re-exports of products subject to export controls are prohibited or subject to special conditions (such as US Sectoral Sanctions) whether published by the US Government or by the EU. You further warrant and represent that You are not located in (and You agree that neither You nor anyone on whose behalf You are acting will install or use the Software in any of the following: Cuba, Iran, North Korea, Sudan or Syria, or in the region of Crimea or Sevastopol, You warrant and represent that You are not using (and You agree that You will not use or allow use of) any Software or technology furnished hereunder or in connection with any Maintenance Services to further activities in support of development, manufacture or use of nuclear fuel or weapons, missiles, or chemical or biological weapons. You further agree that You will immediately notify Juniper if at any time those warranties and representation become no longer accurate or any commitment made in this section is breached. Regardless of any disclosure You might make to Juniper of an ultimate destination of the Software, You shall not export, either directly or indirectly, any Software without first obtaining any and all necessary approvals under US, EU or other applicable laws or regulations. You further take full responsibility for obtaining all import licenses and use permits that may be required by the country or state in which You install and use the Software. You acknowledge and agree that the Software as well as related technical data and assistance that may be furnished in the course of the Maintenance Services may contain encryption or encryption technology and are all subject to legal and regulatory controls and restrictions on export and re-export, including those of the U.S. Department of Commerce. You understand and agrees that Juniper may without liability or breach terminate this license or withhold or impose certain restrictions and conditions on Maintenance Services in order to avoid risk of any violation of export control or other laws . You understand that prohibited use of the Software includes, among other things, use of the Software to export controlled technical data or software in violation of applicable export control laws or regulations, to engage in unlawful dissemination or exploitation of intrusion software, transport of personal identification information, and You agree to refrain from all such activity.
Commercial Computer Software. The Software is a “commercial
item” as defined at Federal Acquisition Regulation (48 C.F.R.) (“FAR”) section 2.101 comprised of “commercial computer software” and “commercial computer software documentation” as those terms are used in FAR 12.212. Consequently, regardless of whether You are the US Government or a department or agency thereof, You shall acquire only those rights with respect to the Software that are set forth in this Agreement and the Proof of Entitlement.
Third Party Software. Any licensor of Juniper whose software is
embedded in the Software shall be a third party beneficiary with respect to this Agreement, and that licensor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent portions of the Software are distributed under and subject to open source licenses obligating Juniper to make the source code for those portions publicly available (such as the GNU General Public License (“GPL”) or the GNU Lesser General Public License (“LGPL”)), Juniper will make those source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and a copy of the LGPL at http://www.gnu.org/licenses/lgpl.html. Open source information and information on contacting Juniper can be found at http://www.juniper.net/support/.
Governing Law. This Agreement (including all documents
incorporated herein) and the terms of any contract for Maintenance Services with Juniper, shall be governed by the laws of the State of California (without reference to its conflicts of laws principles). The provisions of the U.N. Convention for the International Sale of Goods shall not apply. The provisions of the Uniform Computer Information Transactions Act shall not apply. For any disputes arising under this Agreement or any contract for Maintenance Services that You may have with Juniper, the Parties hereby consent to the personal and exclusive jurisdiction of, and venue in the courts of the state of California (and the US District Court for the district of Northern California).
Force Majeure. Except for Your duty to make payment for Software
licensed or contracts for Maintenance Services, and except for Your unauthorized installation or use of Software, neither party will be responsible for any failure or delay in its performance due to causes beyond its reasonable control, including, but not limited to, acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods, earthquakes, accidents, strikes, or fuel crises (“Force Majeure”), provided that the party gives prompt written notice thereof to the other party and uses its diligent efforts to resume performance. Either party shall be entitled to terminate this Agreement if the Force Majeure event continues for a period of one month.
Applicability of This Agreement.
a. Separate Signed Agreements. If You and an authorized > representative of Juniper have signed a valid separate written > agreement governing Your use of any or all Software licensed > from Juniper, then with respect to that Software that signed > agreement will take precedence over any inconsistent terms of > this Agreement.
b. Software-Specific Entitlement Addendum. As to certain > Software, Juniper may post a Software-Specific Entitlement > Addendum (“SSEA”) on its website. The terms of that SSEA are > incorporated into this Agreement as to the Software addressed > by the SSEA. The SSEA shall take precedence over any > inconsistent terms of this Agreement as to that Software.
c. Transition Rules. If You licensed any Software from Juniper > under a different End User License Agreement, then this > Agreement shall apply to that Software if and when, following > posting of this Agreement > at http://www.juniper.net/support/eula/, > You either purchase additional license metric units for the > Software, renew the license at the end of the license term or > reinstate the license after the license expires.
Complete Agreement; Modifications. This Agreement together with
the Applicable SDD, constitutes the entire agreement between the parties regarding its subject matter and supersedes all prior agreements, commitments or representations, oral or written related to the Software and Maintenance Services. The terms and conditions of this Agreement will supersede all pre-printed terms and conditions contained on any purchase order, task order or other business form submitted by either party to the other. Except as otherwise provided in subsection 23.a, this Agreement may not be amended or modified except by a writing executed by the duly authorized representatives of both parties.
a. Future Modifications. Juniper may at any time post on its > website (or that of its affiliates) modifications or > restatements of this Agreement, any applicable SSEA, > Applicable SDD, EOL/EOS Policies or any other policy or > guideline referenced in this Agreement or the Applicable SDD. > Any such modification shall govern the terms of Your license > for any extension or renewal term of the license (or of any > Subscription or contract for Maintenance Services, as > applicable), but only if that extension or renewal term or > reinstatement period starts after posting of the modification. > (See also section 7.e., above, regarding application of > modifications of this Agreement to Updates.)
Severability. If any portion of this Agreement is held invalid,
the Parties agree that such invalidity shall not affect the validity of the remainder of this Agreement. This Agreement and associated documentation have been written in the English language, and the Parties agree that the English version will govern.
Notification. Except as otherwise provided elsewhere in this
Agreement, any report or notice under this Agreement shall be given in a writing, if to Juniper then by email to- or by mail to 1133 Innovation Way , Sunnyvale, CA 94089 USA attn.: EULA Notices provided that the notice identifies You by name, address and email address; or, if to You, by email to Your contact email address (or by mail addressed to Your street address that is associated with Your user account for access to Juniper’s Customer Support Center at http://www.juniper.net/customers/support. If You have no such user account, then notification shall be deemed given to You by emailing or mailing notice to any office or contact email address for the Authorized Source from which You acquired Your license.
Waiver. The failure of Juniper to require Your performance of
any provision of this Agreement shall not affect Juniper’s full right to require such performance at any time thereafter; nor shall its waiver of a breach of any provision hereof be taken to be a waiver of the provision itself.
Translations. . Several translations of this Agreement may
appear at http://www.juniper.net/support/eula/. To the extent of any inconsistency between the English version of this Agreement and any non-English version the English version shall govern.
Definitions. The following definitions apply to capitalized
terms used this Agreement:
a. "Agreement" means this End User License Agreement.
b. "Applicable SDD" is as defined in subsection 7.a, above.
c. "Approved Source" is Juniper or a distributor or reseller > authorized by Juniper to distribute Software and Maintenance > Services in the territory in which You are located.
d. “Commercial Cloud Services” means a service offered and > administered by Juniper or a third party whereby licensees of > Software may without downloading or otherwise taking delivery > of a copy of the Software use and access instances of Software > running in a virtual machine environment resident in a > networked cloud facility or group of facilities.
e. "Confidential Information" is as defined in Section 12, > above.
f. "Customer" or "You" means the individual, other > legal entity, or other business, governmental or > not-for-profit organization (but excluding any parent, > subsidiary or other affiliate of any of the foregoing) > that (A) is the original end user purchaser of a license to > the Software from an Approved Source, (B) accepts the terms of > this Agreement, (C) is identified as “Customer” or “End User” > in the applicable Proof of Entitlement, if any, and (D) has > registered by name with Juniper as end user of the Software.
g. “EOL/EOS Policies” are as defined in Section 4.
h. “Feature Documentation” for a particular Software Version > or Release means Juniper’s published User Guide, Release Notes > and feature listings for that Version or Release.
i. "Juniper Networks" or "Juniper" means (a) Juniper > Networks International B.V., if You have acquired its license > rights to the Software for use in Europe, the Middle East, > Africa, Asia or the Pacific Rim (excluding the Americas); > or (b) Juniper Networks (U.S.), Inc., if You have acquired its > license rights to the Software for use in North America, > Central America or South America.
j. "Juniper Platform" means any hardware router, switch or > other network hardware equipment or devices marketed and sold > by Juniper.
k. "License Metric" is a metric defined in Section 5 or, for > some Software, in an SSEA.
l. "Maintenance Services" for Software means the set of > software maintenance services described in the Applicable SDD.
m. "Proof of Entitlement" is a Juniper order confirmation or > other Juniper-issued written or electronic confirmation of > Juniper’s grant to You of a license. The Proof of Entitlement > must identify You, the Software licensed, any applicable > License Metric and, if applicable, the number of units of that > License Metric that You purchased. The Proof of Entitlement > must also indicate whether the license is a Subscription, the > term of the license and, if it is a Special Purpose License, > the kind of Special Purpose License. If Your license is to > operating system software (as well as any separately > licensable Software products that may be included along with > the operating system software in the object code image you > receive from Juniper) and its Updates, proof of Your purchase > of the Juniper Platform on which the operating system software > runs shall serve as Your Proof of Entitlement but only as long > as You own or lease the Juniper Platform.
n. A "Release" is a particular object code image of a > software product that is identified by a Release denomination > starting with “x.y” followed by additional image identifying > string. Commonly a Release denomination ends with “Rz” where > “z” is one, two or more whole numbers each separated by a > period. For example, Junos Space Network Director 1.5R1.6 is a > Release of the Junos Space Network Director software product.
o. "Software" means the software product identified in Your > Proof of Entitlement, and includes 1) machine-readable > instructions and data, 2) components, files, and modules, 3) > any accompanying audio-visual content, and 4) accompanying > activation keys, if any, and 5) associated documentation. > Except where the context otherwise requires, Software includes > any Update of that Software that You rightfully receive under > a Subscription or contract for Maintenance Services.
p. "Special Purpose License" means any of the licenses > described in Section 6 of the Agreement.
q. "SSEA" means a Software-Specific Entitlement Addendum to > this Agreement that may include non-standard terms and > conditions covering only a specified Software product or > product group.
r. "Subscription" means a license to Software for a finite, > fixed term of use that includes Your right to receive > throughout the term of the Subscription and at no additional > charge, support services under the terms of the Applicable > SDD.
s. "Update" means software that is an upgrade, bug fix, patch > or other Release of Software licensed hereunder that Juniper > makes generally available free of incremental charge to > customers purchasing a Subscription or contract for > Maintenance Services. An Update may be a Release under a > different Version of the Software from that You originally > licensed and, therefore, may have a different set of features > and functionality.
t. "Version" means one or more Releases of a particular > software product with a common “x.y” denomination in the first > two places of the Release identifier. For example, Junos > 12.2R1 through Junos 13.2R11 are all Releases under the same > Version, whereas Junos 12.2R1 and Junos 12.3R1 are Releases > under different Versions.